How to Install Universal Media Server to Stream Media to Any Devices

Universal Media Server (UMS) is a cross-platform and free DLNA-compliant, HTTP(s) PnP Media server, which provides a number of capabilities such as sharing multimedia files such as images, videos, and audio between modern devices such as game consoles, smart TVs, Blu-ray players, Roku devices, and smartphones.

UMS was originally based on a PS3 Media Server in order to ensure greater stability and file compatibility.

UMS streams a wide range of media formats with little or absolutely no configuration. It is powered by a number of multimedia tools such as VLC media player, FFmpeg, AviSynth, MEncoder, tsMuxeR, MediaInfo, and many more.

In this guide, we examine how to install Universal Media Server on Debian-based distributions. We will demonstrate its installation using Ubuntu 22.04.

Step 1: Install Additional Packages and Dependencies

A few additional packages and dependencies are required by the Universal Media Server, which includes a VLC media player, MPlayer, mediainfo, and mencoder for encoding videos.

To install these packages, run the following apt command.

$ sudo apt install mediainfo dcraw vlc mplayer mencoder
Install Dependencies in Ubuntu
Install Dependencies in Ubuntu

Step 2: Install Universal Media Server in Ubuntu

Universal Media Server is available for download from its GitHub repository for various devices including:

  • x86 (For 32-bit older PCs).
  • x86_64 (For 64-bit PCs).
  • arm64 / armhf (For devices with ARM processors e.g. Raspberry Pi).

Since we are running Ubuntu 22.04, we will download the 64-bit tarball file. The latest version of Universal Media Server is 13.5.0 at the time of writing this guide.

So, download the Universal Media Server compressed file as follows and replace the version number accordingly to match the latest release using the following wget command.

$ wget https://github.com/UniversalMediaServer/UniversalMediaServer/releases/download/13.5.0/UMS-13.5.0-x86_64.tgz

Once the tarball has been downloaded, navigate to the location where you downloaded the tarball file extract the tarball file to the /opt directory, and rename the uncompressed folder ‘ums‘.

$ sudo tar -zxvf UMS-13.5.0-x86_64.tgz -C /opt/ --transform s/ums-13.5.0/ums/

Verify the existence of the folder ‘ums‘ in the /opt directory.

$ ls /opt
Check UMS Directory
Check UMS Directory

Step 3: Launch Universal Media Server in Ubuntu

The last step is to launch the media server. To do so, run the following script.

$ /opt/ums/UMS.sh

This loads all the necessary components needed to run the media server. Finally, the media server service will be started at port 9001, and instructions on how to access the media server will be displayed at the end of the script’s output.

Start Universal Media Server in Ubuntu
Start Universal Media Server in Ubuntu

As such, to access Universal Media Server, browser the URL provided. The URL will be different in your case.

http://server-ip:9001

You will get the following interface.

Universal Media Server
Universal Media Server

Step 4: Configure Universal Media Server Systemd Service

When the script is terminated on the command line, the UMS service halts. A better way to run the media server is to configure it as a systemd service so that you can easily start, stop and manage it without any interruptions.

To do this, create a systemd file.

$ sudo nano /etc/systemd/system/ums.service

Next, paste the following lines. Be sure to replace every instance of ‘tecmint’ with your own username for User and Group attributes.

[Unit]
Description=Run UMS as tecmint
DefaultDependencies=no
After=network.target

[Service]
Type=simple
User=tecmint
Group=tecmint
ExecStart=/opt/ums/UMS.sh
TimeoutStartSec=0
RemainAfterExit=yes
Environment="UMS_MAX_MEMORY=500M"

[Install]
WantedBy=default.target

Save the changes and exit the configuration file. The reload systemd and enable and start UMS service using the following commands.

$ sudo systemctl daemon-reload
$ sudo systemctl enable ums.service
$ sudo systemctl start ums.service

Once started, check the Universal Media Service status via command:

$ sudo systemctl status ums.service
Universal Media Server Status
Universal Media Server Status

From the output, we can see that UMS is running as expected.

This concludes our guide on how to install Universal Media Server on Debian-based distributions. From here, you can upload and stream your multimedia files across multiple devices. Your feedback on this guide is welcome.

If you read this far, tweet to the author to show them you care. Tweet a thanks
James Kiarie
This is James, a certified Linux administrator and a tech enthusiast who loves keeping in touch with emerging trends in the tech world. When I'm not running commands on the terminal, I'm taking listening to some cool music. taking a casual stroll or watching a nice movie.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

11 thoughts on “How to Install Universal Media Server to Stream Media to Any Devices”

    • @Darrell,

      Before performing any updates, it’s essential to back up your existing configuration and media files. If anything goes wrong during the update process, you can restore your settings and media.

      Reply
      • Hi Ravi,

        Thank you so much for your answer, can I ask if there is a simple command that will run the update or do I have to go through the install steps again using the latest version?

        Reply
        • @Darrell,

          I have updated the instructions, I suggest you go through the install steps again with the latest version to ensure everything is set up correctly.

          Reply
  1. Is it possible to use UMS to stream the monitor to a client? this will avoid the need to connect a laptop by HDMI to the TV.

    Reply
  2. Followed it as it was written this is my results

    $ sudo systemctl status ums.service
    
    × ums.service - Run UMS as tecmint
         Loaded: loaded (/etc/systemd/system/ums.service; enabled; vendor preset: enabled)
         Active: failed (Result: exit-code) since Sun 2022-09-25 14:06:58 CEST; 4s ago
        Process: 10222 ExecStart=/opt/ums/UMS.sh (code=exited, status=217/USER)
       Main PID: 10222 (code=exited, status=217/USER)
            CPU: 2ms
    
    sep 25 14:06:58  systemd[1]: Started Run UMS as tecmint.
    sep 25 14:06:58  systemd[10222]: ums.service: Failed to determine user credentials: No such file or directory
    sep 25 14:06:58  systemd[10222]: ums.service: Failed at step USER spawning /opt/ums/UMS.sh: No such file or directory
    sep 25 14:06:58  systemd[1]: ums.service: Main process exited, code=exited, status=217/USER
    sep 25 14:06:58  systemd[1]: ums.service: Failed with result 'exit-code
    
    Reply
      • Hi Ravi,

        Removing it was not the solution

        adding group ums
        adding username (mijn username)

        [Unit]
        Description=Run UMS as tecmint (or your desire)
        DefaultDependencies=no
        After=network.target
        
        [Service]
        Type=simple
        User=username (your username)
        Group=ums
        ExecStart=/opt/ums/UMS.sh
        TimeoutStartSec=0
        RemainAfterExit=yes
        Environment="UMS_MAX_MEMORY=500M"
        
        [Install]
        WantedBy=default.target
        

        Thats all

        Johan

        Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.