How to Install UrBackup [Server/Client] Backup System in Ubuntu

Backups are an integral part of any operating system. They ensure that critical copies of data are always available in the unfortunate event that the system crashes or something goes wrong.

Urbackup is an efficient and easy-to-use Client-Server backup system for Linux and Windows Systems. It’s a fast and reliable Linux backup tool that provides a web interface that allows you to add clients whose files and directories need to be backed up.

Urbackup employs deduplication to store backups on either Windows or Linux servers. Backups are created quietly without interrupting other running processes in the system. Once backed up, files can be restored through a web interface while drive volumes can be restored with a bootable USB-Stick.

In this guide, we walk you through how to install Urbackup and perform a backup on Ubuntu-based distributions.

Testing Environment Setup

To illustrate Urbackup in action, we are going to have a setup of two nodes as you can see below.

  • Urbackup Server (Ubuntu 20.04) with IP 192.168.2.104
  • Client System (Linux Mint 20.03) with IP 192.168.2.105

Installing Urbackup Server on Ubuntu 20.04

The first step is to install Urbackup on the server. So, log into the server and refresh the repositories.

$ sudo apt update

Next, install the following dependencies that will be required along the way during the installation.

$ sudo apt install curl gnupg2 software-properties-common -y

The urbackup server is not provided by default on Ubuntu repositories. As such, we are going to install it from the PPA provided by the developer.

$ sudo add-apt-repository ppa:uroni/urbackup

Once the PPA is added to the system, refresh the repositories once more and install the urbackup server.

$ sudo apt update
$ sudo apt install urbackup-server -y
Install Urbackup Server on Ubuntu
Install Urbackup Server on Ubuntu

Along the way, you will be required to provide a path where your backups will be saved. A default path will be provided for at /media/BACKUP/urbackup. This works just fine, and you can as well specify your own path. In this case, we will go with the default path and press the TAB key and hit ENTER.

Set Urbackup Location
Set Urbackup Location

Once installed, the Urbackup service starts automatically. You can confirm this run by running the following command.

$ sudo systemctl status urbackupsrv
Check Urbackup Status
Check Urbackup Status

The output above shows that the service is up and running. You can also enable it to start on system startup as follows.

$ sudo systemctl enable urbackupsrv

The Urbackup server listens on ports 55414 and 55413. You can confirm this using the ss commands:

$ ss -antpl | grep 55414
$ ss -antpl | grep 55413
Check Urbackup Ports
Check Urbackup Ports

You can now access the Urbackup web UI by browsing your server’s IP address.

http://server-ip:55414
Access Urbackup Dashboard
Access Urbackup Dashboard

Step 2: Create Admin User on Urbackup Server

Urbackup has successfully been installed, but it is accessible to everyone since there’s no authentication required. In this step, we will create an administrative user in order to provide authentication.

On the WebUI, click on Settings –> Create User.

Access Urbackup Settings
Access Urbackup Settings

Provide the username and password and click ‘Create’ to add the user.

Create Urbackup Admin
Create Urbackup Admin

Thereafter, the user will be listed on the dashboard as shown.

Urbackup Admin Account
Urbackup Admin Account

Step 3: Add a New Backup Client in Urbackup

After successfully installing the UrBackup server, the next item on the list is to add a client whose files and directories will be backed up on the server.

To do this, click the ‘Add New Client‘ button.

Urbackup Add New Client
Urbackup Add New Client

On the page that appears, click ‘Add new internet/active client‘ and provide your preferred name for the client. Then provide the IP address of the client system and click ‘Add Client‘.

Urbackup Client Details
Urbackup Client Details

A command to be executed on the remote client system will be displayed as shown.

TF=`mktemp` && wget "http://192.168.2.104:55414/x?a=download_client&lang=en&clientid=2&authkey=W0qsmuOyrU&os=linux" -O $TF && sudo sh $TF; rm -f $TF
Install Urbackup on Client System
Install Urbackup on Client System

So, head over to the client system and execute the command. In this case, we are running the command on the Linux Mint system which is our client system.

Install Urbackup Client on Linux Mint
Install Urbackup Client on Linux Mint

Running the command starts the Urbackup client service. You can verify its status as shown.

$ sudo systemctl status urbackupclientbackend
Check Urbackup Client Status
Check Urbackup Client Status

Step 4: Configure Client Backups on Urbackup

The next step is to configure backups. On the client system, we are going to back up the home directory by running the following command. Feel free to provide your own preferred directory.

# /usr/local/bin/urbackupclientctl add-backupdir -x -f -d /home

Now head back to your Urbackup server and you will notice that the client system has been listed as online. You can now run the backup manually otherwise, the backup will run as per the default schedule.

Take Client Backup on Urbackup
Take Client Backup on Urbackup

Soon after that, you will get an ‘Ok’ status showing that the backup was complete.

Urbackup Client Backup Status
Urbackup Client Backup Status

To confirm that the backup was created, click the ‘Activities’ tab and you will see details of the backup.

Urbackup Client Backup Details
Urbackup Client Backup Details

Alternatively, you can click ‘Backups‘ to see details of the file backup.

Check Client Backup File
Check Client Backup File

In this tutorial, we have installed and configured Urbackup on Ubuntu-based distributions and installed a client service to our client machine whose home directory we backed up.

Visit the Urbackup documentation page for more information about the Ubackup utility.

If you read this far, tweet to the author to show them you care. Tweet a thanks
Winnie Ondara
My name is Winnie, a Linux enthusiast and passionate tech writer in Linux and DevOPs topics. I enjoy keeping abreast with the latest technologies in the Linux ecosystem and trying out new tools provided by the FOSS community.

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Join the TecMint Weekly Newsletter (More Than 156,129 Linux Enthusiasts Have Subscribed)
Was this article helpful? Please add a comment or buy me a coffee to show your appreciation.

3 thoughts on “How to Install UrBackup [Server/Client] Backup System in Ubuntu”

  1. Dear Sir,

    Can you explain, please, how to restore my /home directory in a new install of a different ubuntu distribution?

    I did a full backup of my /home on a removable drive, but Urbackup is installed in the new pc, but refuses to see my backup directory, and, consequently, refuse to restore my /home

    Can you help me, please?

    Thanks in advance
    Giuseppe Stancanelli, Italy

    Reply

Got something to say? Join the discussion.

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.